Now Offering Replaceable Respirator Mask Filter Cartridges. Get yours today! Listen to the 3D From Nothing Podcast

5 Axis Machining at Metalmite

Machining on our new Mori Seiki NMV 5000 DCG helps reduce, and in some cases even eliminate, most NON-Value added activities. Such as, the total number of setups needed is reduced, the number of separate operations is reduced, fixtures and fixturing is reduced and the need for secondary (off-line) work is reduced. To our customers the bottom-line is, your parts…

Read more

Running a Tight Ship!

We are constantly pressed to make quicker deliveries and ship early if possible. One thing that cannot be overlooked to the quality of our shipping department. As we spend countless hours cnc machining to make these beautiful parts, it would all be wasted if the containers were not strong enough to get them to the customers safely. We wanted to…

Read more

Time to Shift Gears with Metalmite

We get asked a lot to machine gears for people. We do both internal and external gears, as shown in this photo. We make the parts in house and have the gears cut by one of trusted vendors. We are currently cutting some gears in house using polygonal turning options on our CNC machinery. We have also cut teeth using…

Read more

CNC Machine Shop That is ISO and ITAR

Metalmite is up to date and registered with ITAR and ISO regulations. If you need a copy of either certification click here or e-mail the office at  [email protected] Metalmite is a full service machine shop serving Automotive, Aerospace, and Military Industries. We are a certified Prime U.S. Government Contractor, as well as a Sub-Contractor. We work with all kinds of…

Read more

Just Scratching The Surface

When we upgraded to 5 axis machining a few years ago there were some that wondered how often we would use it or if it was worth the effort. We have answered those questions for sure in the last 6 months. Many of the parts that we have seen lend themselves to the 5 axis machine for ease of reach…

Read more

Saving You Time and Money!

Metalmite has worked very hard to save time and money for their customers over the years. Everything from adding 5 axis machining to CNC screw machining centers that have decreased our leadtime by half. On this job in the picture we have manufactured these aluminum plates for over 10 years. The original setup was on 3 seperate CNC Machining centers…

Read more